ZyXEL Communications VES-1000 Series, Руководство пользователя, Страница: 77 / 227

VES-1000 Series Ethernet Switch
SNMP 9-3
Figure 9-2 SNMP Setup
The following table describes the labels in this screen.
Table 9-3 SNMP Setup
LABEL DESCRIPTION
Get Community Enter the get community, which is the password for the incoming Get- and GetNext- requests
from the management station.
Set Community Enter the set community, which is the password for incoming Set- requests from the
management station.
Trusted Host If you enter a trusted host, your VES will only respond to SNMP messages from this address. If
you leave the field set to 0.0.0.0 (default), your VES will respond to all SNMP messages it
receives, regardless of source.
Trap Community Enter the trap community, which is the password sent with each trap to the SNMP manager.
Trap Destination Enter the IP addresses of up to four stations to send your SNMP traps to.
Apply Click Apply to save your changes back to the switch.
Cancel Click Cancel to begin configuring this screen afresh.