ZyXEL Communications VES-1000 Series, Руководство пользователя, Страница: 169 / 227

VES-1000 Series Ethernet Switch
System Maintenance 2 22-1
Chapter 22
System Maintenance 2
This chapter discusses CI Mode, Remote Management Control and Hardware Monitor SMT menus .
22.1 Command Interpreter Mode
This option allows you to enter command interpreter mode, which allows more advanced system diagnosis and
troubleshooting. Enter 8 from
Menu 24 – System Maintenance . A list of valid commands can be found by typing
“help” or “?” at the command prompt. Enter “exit” to return to the SMT main menu when finished.
Figure 22-1 Valid CI Commands
See the later chapters for more detailed information on CI commands.
22.2 Time and Date Setting
Menu 24.10 - Time and Date Setting allows you to set the time manually or get the current time and date from an
external server when you turn on your VES. The real time is then displayed in
the VES logs.
Select menu 24 in the main menu to open Menu 24 - System Maintenance and then enter 10 to go to Menu 24.10
— System Maintenance — Time and Date Setting to update the time and date settings of your VES as shown in
the following screen.
Figure 22-2 Menu 24.10 System Maintenance - Time and Date Setting
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= None
Time Server IP Address= N/A
Current Time: 00 : 00 : 00
New Time (hh:mm:ss): 11 : 23 : 16
Current Date: 2000 - 01 - 01
New Date (yyyy-mm-dd): 2001 - 01 - 01
Time Zone= GMT+0800
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.
ras> ?
Valid commands are:
sys exit ether vdsl
sw ip
ras>