ZyXEL Communications UAG2100, Руководство пользователя

Страница: 443 / 617

Chapter 39 Addresses
UAG Series User’s Guide
443
Figure 298
Configuration > Object > Address > Address
The following table describes the labels in this screen. See Section 39.2.1 on page 443 for more
information as well.
39.2.1 Address Add/Edit Screen
The Configuration > Object > Address Add/Edit screen allows you to create a new address or
edit an existing one. To access this screen, go to the Address screen (see Section 39.2 on page
442 ), and click either the Add icon or an Edit icon in the Configuration section.
Table 204
Configuration > Object > Address > Address
LABEL DESCRIPTION
Configuration
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the entry’s settings.
Remove To remove an entry, select it and click Remove . The UAG confirms you want to remove it
before doing so.
Object Reference Select an entry and click Object Reference to open a screen that shows which settings
use the entry. See Section 10.3.2 on page 165 for an example.
# This field is a sequential value, and it is not associated with a specific address.
Name This field displays the configured name of each address object.
Type This field displays the type of each address object. “ INTERFACE ” means the object uses
the settings of one of the UAG’s interfaces.
IPv4 Address This field displays the IPv4 addresses represented by each address object. If the object’s
settings are based on one of the UAG’s interfaces, the name of the interface displays first
followed by the object’s current address settings.
Reference This displays the number of times an object reference is used in a profile.