ZyXEL Communications UAG2100, Руководство пользователя

Страница: 438 / 617

Chapter 38 Application
UAG Series User’s Guide
438
The following table describes the labels in this screen.
38.2.1.1 Add Application Object by Category or Service
Click Add in Configuration > Object > Application > Application > Add Application Rule .
Use this screen to choose the signatures that should go into this object.
Figure 294
Configuration > Object > Application > Application > Add Application Rule > Add By
Category
Table 200
Configuration > Object > Application > Application > Add Application Rule
LABEL DESCRIPTION
Name Type a name to identify this application rule. You may use 1-31 alphanumeric characters,
underscores(
_
), or dashes (-), but the first character cannot be a number. This value is
case-sensitive.
Description You may type some extra information on the application object here.
Add Click this to create a new application rule.
Remove Click this to remove the selected application rule.
# This field is a sequential value associated with this application rule..
Category This field shows the category to which the signature belongs in this application rule.
Application This displays the name of the application signature used in this application rule.
OK Click OK to save your changes back to the UAG.
Cancel Click Cancel to exit this screen without saving your changes.