ZyXEL Communications UAG2100, Руководство пользователя

Страница: 184 / 617

Chapter 10 Interfaces
UAG Series User’s Guide
184
10.6.2 Bridge Interface Add/Edit
This screen lets you configure IP address assignment, interface bandwidth parameters, DHCP
settings, and connectivity check for each bridge interface. To access this screen, click the
Add icon,
or select an entry in the Bridge summary screen and click the Edit icon. The following screen
appears.
Activate To turn on an entry, select it and click Activate .
Inactivate To turn off an entry, select it and click Inactivate .
Create Virtual
Interface To open the screen where you can create a virtual interface, select an interface and
click
Create Virtual Interface .
Object Reference Select an entry and click Object Reference to open a screen that shows which settings
use the entry. See Section 10.3.2 on page 165 for an example.
# This field is a sequential value, and it is not associated with any interface.
Status This icon is lit when the entry is active and dimmed when the entry is inactive.
Name This field displays the name of the interface.
IP Address This field displays the current IP address of the interface. If the IP address is 0.0.0.0,
the interface does not have an IP address yet.
This screen also shows whether the IP address is a static IP address ( STATIC ) or
dynamically assigned ( DHCP ). IP addresses are always static in virtual interfaces.
Member This field displays the Ethernet interfaces and VLAN interfaces in the bridge interface. It
is blank for virtual interfaces.
Apply Click Apply to save your changes back to the UAG.
Reset Click Reset to return the screen to its last-saved settings.
Table 78
Configuration > Network > Interface > Bridge (continued)
LABEL DESCRIPTION