ZyXEL Communications IES-1000 - ANNEXE 7 Скачать руководство пользователя страница 88

Страница: 88 / 139

NetAtlas IES-1000 (AAM1008) EMS User’s Guide

7-30

The Configuration Menus

Figure 7-25 Configuration: VLAN: Current Status

The following table describes the labels in this screen.

Table 7-20 Configuration: VLAN: Current Status

LABEL DESCRIPTION

Index

This field displays a unique number for identification purposes.

VLAN ID

This field displays the ID of the VLAN.

Fdb ID

This field displays the unique number that identifies the VLAN's Filtering Database (FDB).

Status

This field displays

Permanent

if the VLAN is active and will remain so after the next reset of the

device. This field is

DynamicGVRP

if the VLAN is active and will remain so until removed by

GVRP. This field is

other

if the VLAN is active, but is not permanent or created by GVRP.

Creation Time

This field displays the time the VLAN is created.

Time Mark

This field displays the read-only time filter. This field always displays

VLAN x (y)

(where x is a number in the

Index

column and y is a number in the

VLAN ID

field)

Tagged Port This field indicates whether a port is tagged (

) or not.

Untagged Port This field indicates whether a port is untagged (

) or not.

Click

Close

to close the screen.

7.6.5

Configuring Static VLANs

This section shows you how to create new VLANs and assign ports to a VLAN.

Содержание IES-1000 - ANNEXE 7












































































































































Результаты поиска

Содержание IES-1000 - ANNEXE 7

Отзывы:

ZyXEL Communications IES-1000 - ANNEXE 7, Руководство пользователя, Страница: 88 / 139

Результаты поиска

Содержание IES-1000 - ANNEXE 7

Отзывы: