manualshive.com logo in svg

ZyXEL Communications IES-1000 - ANNEXE 7, Руководство пользователя, Страница: 67 / 139

Поделиться
Скачать
ZyXEL Communications IES-1000 - ANNEXE 7 Скачать руководство пользователя страница 67

NetAtlas IES-1000 (AAM1008) EMS User’s Guide 

The Configuration Menus 

7-9 

Table 7-5 System: ADSL: Line Setup 

LABEL DESCRIPTION 

Cancel Click 

Cancel 

to close the screen. 

7.3.1 

ADSL Line Setup 

To configure the ADSL port(s), select a number of ports (by pressing the 

[CTRL]

 key and clicking at the same 

time) or a port in the 

ADSL Line Setup

 screen and click 

Set Ports

.  

 

Figure 7-7 ADSL Line Setup: Set Port 

To change the port settings, select the check box for the field(s). The following table describes the related labels in 
this screen.  

Table 7-6 ADSL Line Setup: Set Port 

LABEL DESCRIPTION 

Admin Status 

Select this option and select 

Enable 

from the drop-down list box to activate the port. Select 

Disable 

to deactivate the port. 

ADSL Mode 

Select this option and select a mode from the drop-down list box. Refer to the user’s guide 
that comes with your IES for more information.  

Содержание IES-1000 - ANNEXE 7












































































































































Отзывы:

Нет отзывов