ZyXEL Communications IES-1000 - ANNEXE 7 Скачать руководство пользователя страница 103

Страница: 103 / 139

NetAtlas IES-1000 (AAM1008) EMS User’s Guide

The Performance Interface Menus

8-3

Table 8-2 List Packet Statistics: Outgoing

FIELD

DESCRIPTION

OutDiscards

This is the number of outbound packets that were (chosen to be) discarded even though no
errors had been detected to prevent their being transmitted. One reason for discarding such a
packet could be to free up buffer space.

OutErrors

This is the number of outbound packets that could not be transmitted because of errors.

For information on editing a table entry, please see

Section 5.1.1

Figure 8-3 List Packet Statistics: All

The following table describes the additional fields in this screen.

Table 8-3 List Packet Statistics: All (Additional Fields)

FIELD

DESCRIPTION

InOctets

This is the total number of octets received on the interface, including framing characters.

OutOctets

This is the total number of octets transmitted out of the interface, including framing characters.

ErrorsPercent

This is the amount of errors as a percentage of total frames.

Utilization

This is the utilization of the ports.

For information on editing a table entry, please see

Section 5.1.1

8.2 List Byte Statistics

For details on information formats see

Chapter 5

. Click

Performance

Interface

List Byte Statistics

to view

byte statistics in tabular format.

Содержание IES-1000 - ANNEXE 7












































































































































Результаты поиска

Содержание IES-1000 - ANNEXE 7

Отзывы:

ZyXEL Communications IES-1000 - ANNEXE 7, Руководство пользователя, Страница: 103 / 139

Результаты поиска

Содержание IES-1000 - ANNEXE 7

Отзывы: