ZyXEL Communications IES-1000 - ANNEXE 7 Скачать руководство пользователя страница 69

Страница: 69 / 139

NetAtlas IES-1000 (AAM1008) EMS User’s Guide

The Configuration Menus

7-11

Select multiple port numbers (by pressing the

[CTRL]

key and clicking at the same time) or a port number

in the

Port

field and click

Mapping =>

. The port-profile mapping displays in the

Port Profile

list box.

Click

Close

to close the screen.

7.3.3 Line

Status

Line status allows you to view current line status of ports. Line status information is refreshed every 30 seconds.

Click

Configuration, ADSL, Line Status

to display the

ADSL Line Status

screen.

Figure 7-9 System: ADSL: Line Status

The following table describes the labels in this screen.

Table 7-7 ADSL Line Status

LABEL DESCRIPTION

Port

This field displays the port (or line) number.

Line Type

This field displays the mode (

interleave

fast

) used on the port.

Admin Status

This field is

Enable

if the port is activated. This field is

Disable

if the port is not activated.

Oper Status

This field displays the actual operational status of the port. This field is

if the port is working

properly. This field is

Down

if the port is not working properly.

Upstream Tx
Rate

This field displays the actual upstream transmission speed in kilobits per second (Kbps).

Downstream Tx
Rate

This field displays the actual downstream transmission speed in kilobits per second (Kbps).

Содержание IES-1000 - ANNEXE 7












































































































































Результаты поиска

Содержание IES-1000 - ANNEXE 7

Отзывы:

ZyXEL Communications IES-1000 - ANNEXE 7, Руководство пользователя, Страница: 69 / 139

Результаты поиска

Содержание IES-1000 - ANNEXE 7

Отзывы: