ZyXEL Communications IES-1000 - ANNEXE 7 Скачать руководство пользователя страница 102 | Manualshive

Страница: 102 / 139

ZyXEL Communications IES-1000 - ANNEXE 7 Скачать руководство пользователя страница 102

NetAtlas IES-1000 (AAM1008) EMS User’s Guide

8-2

The Performance Interface Menus

Table 8-1 List Packet Statistics: Incoming

FIELD

DESCRIPTION

InDiscards

This is the number of inbound packets that were (chosen to be) discarded even though no
errors had been detected to prevent their being delivered to a higher-layer protocol. One
reason for discarding such a packet could be to free up buffer space.

InErrors

This is the number of inbound packets that contained errors preventing them from being
delivered to a higher-layer protocol.

InUnknownProtos

This is the number packets received via the interface which were discarded because of an
unknown or unsupported protocol.

For information on editing a table entry, please see

Section 5.1.1

Figure 8-2 List Packet Statistics: Outgoing

The following table describes the fields in this screen.

Table 8-2 List Packet Statistics: Outgoing

FIELD

DESCRIPTION

Index

The index is unique for each interface. It ranges between 1 and the value of ifNumber (the
number of interfaces). The value for each interface must remain constant at least from one re-
initialization of the device's network management system to the next reinitialization.

Descr

This is a text string containing information about the interface.

Type

This shows the type of interface, distinguished according to the physical/link protocol(s)
immediately `below' the network layer in the protocol stack, for example “94” is ADSL.

OutUcastPkts

This is the total number of packets that higher-level protocols requested be transmitted to a
subnetwork-unicast address, including those that were discarded or not sent.

OutNUcastPkts This is the total number of packets that higher-level protocols requested be transmitted to a non-

unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were
discarded or not sent.

«
...
100
101
102
103
104
...
»

Содержание IES-1000 - ANNEXE 7












































































































































Отзывы:

Нет отзывов