ZyXEL Communications GS2200 Series, Руководство пользователя

Страница: 181 / 320

Chapter 24 AAA
GS2200 Series User’s Guide
181
TCP Port The default port of a server for authentication is 49. You need not change this
value unless your network administrator instructs you to do so.
Shared Secret Specify a password (up to 32 alphanumeric characters) as the key to be shared between
the external server and the Switch. This key is not sent over the network. This
key must be the same on the external server and the Switch.
Delete Check this box if you want to remove an existing server entry from the Switch.
This entry is deleted when you click Apply.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Accounting Server Use this section to configure your accounting settings.
Timeout Specify the amount of time in seconds that the Switch waits for an accounting request
response from the server.
Index This is a read-only number representing a accounting server entry.
IP Address Enter the IP address of an external accounting server in dotted decimal
notation.
TCP Port The default port of a accounting server is 49. You need not change this value
unless your network administrator instructs you to do so.
Shared Secret Specify a password (up to 32 alphanumeric characters) as the key to be shared between
the external accounting server and the Switch. This key is not sent over the
network. This key must be the same on the external accounting server and the
Switch.
Delete Check this box if you want to remove an existing accounting server entry from
the Switch. This entry is deleted when you click Apply.
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top navigation
panel to save your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to begin configuring this screen afresh.
Table 63
Advanced Application > AAA > Server Setup (continued)
LABEL DESCRIPTION