ZyXEL Communications GS2200 Series, Руководство пользователя

Страница: 36 / 320

Chapter 4 The Web Configurator
GS2200 Series User’s Guide
36
VLAN This link takes you to screens where you can configure port-based or 802.1Q VLAN
(depending on what you configured in the Switch Setup menu). You can also configure a
protocol based VLAN or a subnet based VLAN in these screens.
Static MAC
Forwarding This link takes you to a screen where you can configure static MAC addresses for a port.
These static MAC addresses do not age out.
Static Multicast
Forwarding This link takes you to a screen where you can configure static multicast MAC addresses
for port(s). These static multicast MAC addresses do not age out.
Filtering This link takes you to a screen to set up filtering rules.
Spanning Tree
Protocol This link takes you to screens where you can configure the RSTP/MRSTP/MSTP to prevent
network loops.
Bandwidth Control This link takes you to a screen where you can configure bandwidth limits on the Switch.
Broadcast Storm
Control This link takes you to a screen to set up broadcast filters.
Mirroring This link takes you to screens where you can copy traffic from one port or ports to
another port in order that you can examine the traffic from the first port without
interference.
Link Aggregation This link takes you to screens where you can logically aggregate physical links to form
one logical, higher-bandwidth link.
Port
Authentication This link takes you to a screen where you can configure IEEE 802.1x port authentication
for clients communicating via the Switch.
Port Security This link takes you to screens where you can activate MAC address learning and set the
maximum number of MAC addresses to learn on a port.
Classifier This link takes you to a screen where you can configure the Switch to group packets
based on the specified criteria.
Policy Rule This link takes you to a screen where you can configure the Switch to perform special
treatment on the grouped packets.
Queuing Method This link takes you to a screen where you can configure queuing with associated queue
weights for each port.
Multicast This link takes you to screens where you can configure various multicast features, IGMP
snooping and create multicast VLANs.
AAA This link takes you to a screen where you can configure authentication, authorization
services via external servers. The external servers can be either RADIUS (Remote
Authentication Dial-In User Service) or (Terminal Access Controller Access-
Control System Plus).
IP Source Guard This link takes you to screens where you can configure filtering of unauthorized DHCP and
ARP packets in your network.
Loop Guard This link takes you to a screen where you can configure protection against network loops
that occur on the edge of your network.
Layer 2 Protocol
Tunneling This link takes you to a screen where you can configure L2PT (Layer 2 Protocol Tunneling)
settings on the Switch.
PPPoE This link takes you to screens where you can configure how the Switch gives a PPPoE
termination server additional subscriber information that the server can use to identify
and authenticate a PPPoE client.
Errdisable This link takes you to a screen where you can configure CPU protection and error disable
recovery.
IP Application
Static Routing This link takes you to a screen where you can configure static routes. A static route
defines how the Switch should forward traffic by configuring the TCP/IP parameters
manually.
Table 5
Navigation Panel Links (continued)
LINK DESCRIPTION