ZyXEL Communications GS2200 Series, Руководство пользователя

Страница: 207 / 320

Chapter 25 IP Source Guard
GS2200 Series User’s Guide
207
25.10.1.4 Configuring DHCP Snooping
Follow these steps to configure DHCP snooping on the Switch.
1
Enable DHCP snooping on the Switch.
2
Enable DHCP snooping on each VLAN, and configure DHCP relay option 82.
3
Configure trusted and untrusted ports, and specify the maximum number of DHCP packets that
each port can receive per second.
4
Configure static bindings.
25.10.2 ARP Inspection Overview
Use ARP inspection to filter unauthorized ARP packets on the network. This can prevent many kinds
of man-in-the-middle attacks, such as the one in the following example.
Figure 133
Example: Man-in-the-middle Attack
In this example, computer B tries to establish a connection with computer A. Computer X is in the
same broadcast domain as computer A and intercepts the ARP request for computer A. Then,
computer X does the following things:
• It pretends to be computer A and responds to computer B.
• It pretends to be computer B and sends a message to computer A.
As a result, all the communication between computer A and computer B passes through computer
X. Computer X can read and alter the information passed between them.
25.10.2.1 ARP Inspection and MAC Address Filters
When the Switch identifies an unauthorized ARP packet, it automatically creates a MAC address
filter to block traffic from the source MAC address and source VLAN ID of the unauthorized ARP
packet. You can configure how long the MAC address filter remains in the Switch.
These MAC address filters are different than regular MAC address filters ( Chapter 12 on page 101 ).
• They are stored only in volatile memory.
• They do not use the same space in memory that regular MAC address filters use.
• They appear only in the ARP Inspection screens and commands, not in the MAC Address
Filter screens and commands.
A
X
B