ZyXEL Communications ALC1024, Руководство пользователя

Страница: 198 / 255

Commands with MSC
27-2 Commands with MSC
27.2 Commands with MSC
The following table lists all of the commands that you can use with the line card when you use the management
switch card.
Refer to the chapters on commands with the Ethernet extension card for descriptions of
commonly used commands. Using commands not documented in the user’s guide can damage
the unit and possibly render it unusable.
Nonvolatile memory refers to the card’s storage that remains even if the card’s power is turned off. Run time
(memory) is lost when the card’s power is turned off.
Use the
lcman
commands to configure the linecards
You only need to use
lcman command <slot> <subcommands>
for some statistics commands.
Table 27-1 Commands with MSC
COMMANDS DESCRIPTION
config
save This command saves configuration
information in all modules to nonvolatile
memory.
lcman
status Shows the status of the line card manager.
svlan setentry <vid> <slot-port>
[<adv> <tag>]
Sets a VLAN entry.
delentry <vid> Deletes a VLAN entry.
list [<vid> | <startVID>
<endVID>]
Displays VLAN settings.
active <vid> Turns on VLAN.
deactive <vid> Turns off VLAN.
name set <vid> <name> Sets a name for a VLAN entry.
name list Displays the names of the VLAN entries.
port enable <slot-port> Turns on a subscriber port.
disable <slot-port> Turns off a subscriber port.
set <slot-port>
<profile_name> [<mode>]
Sets a subscriber port.
list <slot> Displays a line card’s port settings.
profile set <"*dsl">
<prof_name> <parameters>
Creates a line profile.
profile delete <"*dsl">
<prof_name>
Removes a line profile.