ZyXEL Communications ALC1024, Руководство пользователя

Страница: 157 / 255

Web Configurator with EEC 1
Port Setup 18-5
Table 18-2 Ethernet Port Setup
LABEL DESCRIPTION
Port Setup Click this link to go to the Port Setup screen.
Speed Use the drop-down list box to select a speed and duplex setting for the Ethernet port. In
10/100Mbps Fast Ethernet, the speed can be 10Mbps or 100Mbps. The duplex mode can be
Half (meaning traffic is transmitted in one direction at a time) or Full (meaning traffic is
simultaneously transmitted in both directions). Select
Auto to have the Ethernet port auto-
negotiate with a peer to obtain the connection speed and duplex mode.
PVID Type the Port VLAN ID from 1 to 4094. The PVID tells the line card what VLAN ID to assign to
untagged packets that come in through this port.
Apply Click Apply to save your changes back to the line card's volatile memory. The line card loses
these changes if it is turned off or loses power, so use the Config Save link in the navigation
panel on the left to save your changes to the non-volatile memory when you are done
configuring. Click
Cancel to begin configuring this screen afresh
Reset Click Reset to begin configuring this screen afresh.
18.6.2 ADSL Port Setup Screen
Click an ADSL port in the Port Setup screen to open this screen.
Figure 18-3 ADSL Port Setup
The following table describes this screen.