ZyXEL Communications ALC1024, Руководство пользователя

Страница: 35 / 255

Commands with EEC
Commands with EEC Introduction 3-1
This section introduces the command line interface and lists all of the commands that are available
when you use the ADSL line card with the Ethernet extension card.
3.1 Commands with EEC Overview
You can use text command lines for software configuration. The rules of the commands are listed next.
The command keywords are in
courier new
font.
1. The command keywords must be entered exactly as shown, that is, no abbreviations are allowed.
The required fields in a command are enclosed in angle brackets
<>
, for instance,
list port <port #>
means that you must specify the port number for this command.
2. The optional fields in a command are enclosed in square brackets
[]
, for instance,
config [save]
means that the
save
field is optional.
3. “Command” refers to a command used in the command line interface.
4. The
|
symbol means “or”.
3.1.1 Command Structure with EEC
The card uses a two-level command structure with the Ethernet extension card. The commands related to one
subsystem are grouped under a primary command of that subsystem, for instance, to configure the Ethernet
parameters, you must first enter the Ethernet subsystem by entering the
ethernet
command. When you are in a
subsystem, the system reminds you by including the subsystem name in the command prompt, for example,
192.168.1.1 ethernet>
To get back to the top level prompt from a subsystem, use the
home
command.
3.1.2 Command Help Facility
The system includes a help facility to provide you with online assistance.
You can issue the
help
command to display a list of available commands in response.
You can issue
help
with a command name to get more details about it, for instance:
192.168.1.1> help version
Chapter 3
Commands with EEC Introduction