ZyXEL Communications ALC1024, Руководство пользователя

Страница: 197 / 255

Commands with MSC
Commands with MSC 27-1
This chapter introduces the command line interface and lists all of the commands that are available when
you use the line card with the management switch card.
27.1 Command Line Interface with MSC Overview
You can use text command lines for software configuration. The rules of the commands are listed next.
1. The command keywords are in
courier new
font.
2. The command keywords must be entered exactly as shown, that is, no abbreviations are allowed.
3. The required fields in a command are enclosed in angle brackets
<>
, for instance, list port <port #> means
that you must specify the port number for this command.
4. The optional fields in a command are enclosed in square brackets [] , for instance, config [save]
means that the
save
field is optional.
5. “Command” refers to a command used in the command line interface (CI command).
6. The
|
symbol means “or”.
27.1.1 Command Structure with MSC
The card uses a one-level command structure with the management switch card. Specify the line card that you want
to configure followed by the full command. You must type the full command every time. The syntax is as follows.
192.168.1.1> lcman command <slotid> <command>
For instance, the following example shows how to enable ADSL port 2 on the line card in slot 3.
192.168.1.1> lcman command 3 adsl enable port 2
27.1.2 Saving Your Configuration with MSC
Always remember to save your configuration using the following syntax:
192.168.1.1> config save
Do not turn off your IES-2000 or IES-3000 or remove the line card while saving your configuration.
This command saves all system configurations to nonvolatile memory. You must use this command to save any
configuration changes that you make, otherwise the line card returns to its default settings when it is restarted. Save
your changes after each configuration session.
Chapter 27
Commands with MSC