ZyXEL Communications ALC1024, Руководство пользователя

Страница: 134 / 255

Web Configurator with EEC 1
16-2 Initial Configuration
Step 3.
Specify the name for the profile.
Step 4.
Configure the upstream and downstream maximum and minimum rates, and the maximum, minimum
and target signal to noise margins.
Step 5.
Click the Add button in the Profile Setup screen.
Step 6.
Click Apply to save the profile.
Step 7.
Repeat from step 1 until you have all the necessary profiles.
Second, configure the individual DSL ports on the Line Card or SLC.
Step 1.
From the Profile Setup screen, click the Port Setup link to return to the Port Setup screen.
Step 2.
Click a port number for a DSL port in the Index column to go to the individual port setup screen.
Step 3.
On the individual port setup screen, select the Enable check box to enable the port.
Step 4.
Select a profile from the drop-down list box.
Step 5.
Select an encapsulation type.
Step 6.
Enter the VPI/VCI.
Step 7.
Enter a PVID to assign to untagged frames received on this port.
Step 8.
Click Apply to save the port settings.
Step 9.
Repeat from step 1 until you have all the necessary ports configured.
16.4 VLAN Setup
In a typical setup, each DSL port uses a different VLAN ID (VID) in order to isolate the subscribers. Configure a
management VLAN ID for the Ethernet port.
16.4.1 ALC VLAN Setup
Procedure:
Step 1.
To configure tag-based VLAN on the ALC ports, click VLAN Setup on the navigation panel.
Do not alter VLAN ID 1 or the Management VLAN ID yet.
Step 2.
Click an index number to open the Add VLAN Static Entry screen.
Step 3.
Fill in the VLAN ID for the port in the VLAN ID textbox.
Step 4.
For a typical setup, select Fixed in the Port Type field; select TX Tagging for the uplink port; and
select Forbidden for all the other ports.
Step 5.
Click the Apply button.
Step 6.
Repeat these steps for the rest of the ports.