ZyXEL Communications ALC1024, Руководство пользователя

Страница: 40 / 255

Commands with EEC
3-6 Commands with EEC Introduction
Table 3-1 Commands with EEC
COMMANDS DESCRIPTION
MODULE COMMAND ATTRIBUTES
wb <addr> <data> This command writes 1 byte to the
specified address.
wh <addr> <data> This command writes 1 half-word to the
specified address.
ww <addr> <data> This command writes 1 word to the
specified address.
tell <process> <cmd> [<attrs>] This command sends a tell command to
the specified process.
config
list This command lists all registered
modules.
print This command prints configuration
information for all modules.
<module> This command prints configuration
information for the specified module.
reset This command resets configuration
information in all modules from
nonvolatile memory.
<module> This command resets configuration
information in the specified module from
nonvolatile memory.
save This command saves configuration
information in all modules to nonvolatile
memory.
<module> This command saves configuration
information in the specified module to
nonvolatile memory.
resource This command shows the controlled
resources in all processes.
<process> This command shows the controlled
resources in the specified process.
<process> <resource> This command shows the value of the
specified resource in a process.
<process> <resource> <value> This command sets the value of a
process’s resource.
version This command shows the configuration
driver’s version information.
ethernet set auto <on | off> This command enables/disables Ethernet
port auto negotiation.
duplex <full | half> This command sets the Ethernet port to
full or half duplex.