Z-800 Instructions for Use.
43/69
P/N 800-600-01-08 Rev 08/10
GETTING STARTED
SAVE INFUSION PARAMETERS AS PROTOCOL
Turn on the pump; Select NEW INFUSION; Program an
infusion.
Example:
1.
Select
10 STEP Mode.
Program a 10 Step infusion with
the following parameters.
STEP 1:
RATE=50ml/h, VTBI=25ml.
STEP 2:
RATE=100ml/h, VTBI=50ml.
STEP 3:
RATE=150ml/h, VTBI=75ml.
STEP 4:
RATE=200ml/h, VTBI=100ml.
STEP 5:
RATE=250ml/h, VTBI=250ml.
2.
From the 10 STEP Programming screen, press
CONFIG
soft key to access CONFIG screen. Select
8. BIOMED
OPT
,
3.
Inside BIOMED OPT sub menu, select
8.6. SAVE AS
PROTOCOL
.
4.
Select one of the 3 protocols to be used to store the
infusion parameters. Enter in the name to be used for the
protocol.
Use 10X numeric data entry key to scroll through
letter A through Z.
Use 1X numeric data entry key to scroll through digit
0 through 9 and SPACE.
Use Up/Down Arrow to move curser back and forth.
5.
Press
SAVE
soft key to associate the current programmed
infusion parameters with the protocol name as entered.