63 / 130
User’s Manual 3PH 10KTL-15KTL-V2
Rev. 1.1 15/03/2021
Identification: MD-AL-GI-00
Rev. 1.1 of 15/03/2021 - Application: GID
AC Thresholds
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter menu “7. AC
Thresholds.” Here you can see the value of the voltage and frequency thresholds for the relay to trip.
Power factor
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter menu “8. Power
factor.” Here you can see the value of the power factor.
P(Grid) Feed-in
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter menu “9.
P(Grid) Feed-in.” Here you can see the value of the set value of the power fed into the grid.
Power Ratio
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter the “10. Power
Ratio” menu. Here you can see whether this function has been enabled or not.
P(f)
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter menu “11. P(f).”
Here you can see the P(f) value that has been set.
Q(v)
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter menu “12.
Q(v).” Here you can see the Q(v) value that has been set.
Service Code
Use the “Up” and “Down” keys in the “System Info” menu to move, and the “OK” key to enter menu “13.
Service Code.” Here you can see the currently installed firmware version.
(D)
Press the “OK” key to enter the “Date and Time” menu.
Press the “Back” key in the main interface and the “Up” or “Down” keys to enter the submenu “4. Date and
Time”, then press “OK” to display the current date and time set on the inverter.
(E)
Press the “OK” key to enter the “Update Software” menu.
