26 / 130
User’s Manual 3PH 10KTL-15KTL-V2
Rev. 1.1 15/03/2021
Identification: MD-AL-GI-00
Rev. 1.1 of 15/03/2021 - Application: GID
Figure 9 – Requirements for installing multiple inverters
Note:
For safety reasons, ZCS Spa and/or its partners may not carry out any technical repairs or
maintenance work, or move the inverter from and to the ground if it is installed at a height of more than 180
cm from the ground.
Inverters installed at higher heights must be moved to the ground before they can be repaired or serviced.
3.5.
Moving the 3PH 10KTL-15KTL-V2 inverter
This section describes how to move the inverter correctly
1)
When opening the packaging, insert your hands into the slots on both sides of the inverter and take a
hold of it as shown in Figures below. Two people are needed to carry out this operation in order to
ensure the safety of people and the correct handling of the inverter.
