51 / 130
User’s Manual 3PH 10KTL-15KTL-V2
Rev. 1.1 15/03/2021
Identification: MD-AL-GI-00
Rev. 1.1 of 15/03/2021 - Application: GID
The display will show “OK” if the setting is correct and “Error” in case of an error.
The date and time are visible in the submenu “4. Time” in the main menu.
Clear Energy
Select “2. Clear Production” and press “OK” to enter the menu for deleting the energy data and in particular
the energy production daily and in total, which is shown in the main interface. Press “OK” to start the
procedure; the display will show “Enter PWD!”, press “OK” to enter the password. Enter the password “0001”
using the “Up” and “Down” keys to select the number and “OK” to move to the next one, and confirm. If the
display shows “Incorrect, try again!” press the “Back” key and enter the password again. When the password
entered is correct, the inverter will delete the data relating to the energy produced and the display will show
“OK” if the setting is successful.
Clear Events
Select “3. Clear events” and press “OK” to enter the menu for clearing historical events, i.e. to clear all error
warnings present in the “List of historical events” submenu. Press “OK” to start the procedure; the display
will show “OK” if the procedure is successful.
Set Country
Select “4. Set Country” and press “OK” to enter the menu for setting the national grid connection regulations.
If “Setting disabled” appears, go to point “6. Enable Country” to enable this function. After enabling the
function, repeat the steps described above and set the code for the desired country using the “Up” and
“Down” keys, confirming with “OK”; the display will show “OK” if the operation is successful. The current
country code can be checked from the “System Info” menu.
Note: The change of the country code will take effect after the next start-up of the inverter.
For more information and to know the country regulations on board the inverter, refer to the following table.
Code
Country
Code
Country
Code
Country
00
Germany VDE AR-
N4105
12
Poland
24
Cyprus
01
CEI 0-21 Internal
13
Germany BDEW
25
India
02
Australia
14
Germany VDE 0126
26
Philippines
03
Spain RD1699
15
Italy CEI 0-16
27
New Zealand
04
Turkey
16
UK-G83
28
Brazil
05
Denmark
17
Greece - islands
29
Slovakia VSD
06
Greece - mainland
18
EUEN50438
30
Slovakia SSE
07
Netherlands
19
IEC EN61727
31
Slovakia ZSD
