Zubler VARIO 200, Руководство по эксплуатации

Страница: 9 / 24

Seite
9
Seite
Seite
Seite Seite Seite Seite
Page
Enter
003-PULSE MC CERAMAY
450C Edit “ 063-PULSE MC DENTIN 1 “
Program typeProfessional
-Start temp 450C
-Pre dry Yes
-Pre dry time 3:00
-Closing time 3:00
-Soak temp 450C
-Soak time 0:30
-Heat rate 55C
-Final temp 820C
-Hold time 1:00
-Temper No
-Open temp 820C
-Opening time 1:00
-Vacuum Yes
-Release vacuum Heat up
-Vacuum End 820C
We recommend the Professional Program for all firing
tasks. Perfect pre-drying and uniform heating ensure
excellent firing results.
Esc
Start temperature Temperature in the
firing chamber at which the program starts.
Pre-dry Selecting “YES” activates the special pre-
drying program.
Pre-dry time Enter a time. In this section, the lift
identifies a predefined position for the entire
time, depending on the heat radiated by the
firing chamber. The object can thus be pre-dried
at a constant temperature.
Closing time Time in which the lift moves in 10
increments into the firing chamber.
Soak temperature At this temperature the object
remains in the closed firing chamber in order to
achieve an even temperature distribution. Soak
temperature = Vacuum start
Soak time States the retention period of the object
in the firing chamber before evacuation and the
temperature increase.
Heat rate Temperature increase per minute
Final temperature Temperature at which the cera-
mic is sintered.
Hold time Period for which the ceramic is maintai-
ned at the final temperature.
Temper Selecting “YES” activates the special tem-
pering program.
Temper temperature Temperature at which the
ceramic is tempered, i.e. subjected to precise
thermal treatment at a constant temperature.
Temper time States the duration of the thermal
treatment in the firing chamber when closed.
Open temperature Temperature at which the devi-
ce opens the firing chamber.
Opening time Decent time of the lift from the
chamber to the fully open position.
Vacuum Selecting “YES” activates the vacuum
parameter (firing under vacuum).
Vacuum release (
⇒
=Selection)
During the heating up stage
⇒
“Release Vacuum
Heat up”
During the hold time at final temperature
⇒
„Release Vacuum Hold time“
During the cooling stage
⇒
„Release Vacuum
Cooling“
Vacuum end Displays the temperature or time at
which the vacuum is released.
Edit done ? Saving or cancel the program by selec-
ting „Yes“ or „No“.
Program typs - 1:
Professional Program
Individual firing management with 16 programmable parameters for processing all dental ceramic materials perfectly.
1 Operation