Zubler VARIO 200, Руководство по эксплуатации

Страница: 10 / 24

10
Seite
Seite
Page
Enter
003-PULSE MC CERAMAY
450C Edit “ 063-PULSE MC DENTIN 1 “
Program type Standard
-Start temp 450C
-Pre dry Yes
-Pre dry time 3:00
-Closing time 3:00
-Heat rate 55C
-Final temp 820C
-Hold time 1:00
-Opening time 1:00
-Vacuum Yes
-Vacuum Star 450C
-Vacuum End 820C
Esc
Start temperature Temperature in the
firing chamber at which the program starts.
Pre-dry Selecting “YES” activates the special pre-
drying program.
Pre-dry time Enter a time. In this section, the lift
identifies a predefined position for the entire
time, depending on the heat radiated by the
firing chamber. The object can thus be pre-dried
at a constant temperature.
Closing time Time in which the lift moves in 10
increments into the firing chamber.
Heat rate Temperature increase per minute in order
to reach the final temperature.
Final temperature Temperature at which the cera-
mic is sintered.
Hold time Period for which the ceramic is maintai-
ned at the final temperature.
Opening time Decent time of the lift from the
chamber to the fully open position.
Vacuum Selecting “YES” activates the vacuum
parameter (firing under vacuum).
Vacuum start Temperature at which the vacuum
pump begins to evacuate the firing chamber.
Vacuum end Temperature at which the vacuum
release occurs.
Edit done? Saving of the program.
Program types - 2:
Standard Program
A standard firing management in accordance with the guidelines for the dental ceramics available on the market.
1 Operation