Zubler VARIO 200, Руководство по эксплуатации

Страница: 4 / 24

4
Seite
Seite
Seite
Page
0 Introduction
We, Zubler Gerätebau GmbH
Buchbrunnenweg 26
89081 Ulm-Jungingen
www.zubler.de
hereby declare, that the ceramic furnace product
VARIO 200
is in compliance with the protective requirements in
accordance with the provisions of the following
directives:
2006/42/EG Machines Directive
2006/95/EG Low-Voltage Directive
2004/108/EG EMV Directive.
In the event of any amendments being made to the
product without our agreement, then this statement
shall no longer be valid.
Kurt Zubler
Managing Director
0.1 Conformity Declaration
0.2 General
The correct processing of modern dental ceramic
materials is placing higher demands on dental techni-
cians. We believe that the VARIO 200 furnaces meet
these requirements by providing the latest technology
for current and future ceramic processing.
The software installed in the VARIO 200 series
enables you to optimize firing management for all
dental ceramics available on the market.
The use of materials of the highest quality increases
the lifetime of the furnace, enabling you to reproduce
optimal results over many years.
Our goal is to ensure that you will be able to produce
top-quality ceramic prosthesis using our VARIO 200
furnaces for many years. We will therefore keep you
informed of any changes to the software or extension
of the processing possibilities.
We hope that the ceramic furnace provides you with
great success and satisfaction. Thank you.
0.3 Setting up the furnace
Connect to pump
Filter
Connect to furnace
■
Put the furnace onto a stable and level surface.
■
Place the vacuum pump near the furnace.
■
Please make sure to retain the original cardboard
boxes and other packaging materials. You will need
to have them if returning the device for service.
■ Attach the short transparent vacuum hose with
its filter to the connector marked “VACUUM” at
the back of the furnace.
■ Attach the long transparent hose to the free end
of the filter.
■
Connect the vacuum pump and the furnace
using the vacuum pump power cord.