Zte ZXC10-BTSB I2, Руководство по установке

Страница: 42 / 178

ZXC10-BTS (V5.4) Installation Manual
3-4
ZXC10-BT S Cabinet Component
Net weight :
Gross weight :
Size :
Company: ZT E CORPORAT ION
Fig. 3.3-1 Packing Box of the Module
3.3.2 Unpacking
Take the following steps to unpack a carton:
1. Use the diagonal pliers to cut the straps.
2. Use a paper knife to cut the adhesive tape along the slits on the box covers. Note
that the cut should not be too deep and damage the goods inside.
3. Count the quantity and types of boards inside the carton against the packing list
attached and sign for the acceptance with the customer on site.
3.3.3 Inspecting the Boards
Check the boards against the delivery list and contact the equipment supplier in time if
any incompliance is found.
3.4 Goods Acceptance and Handover
After goods acceptance both parties should sign the
Unpacking Inspection Report
for
confirmation, after which the goods should be handed over to the customer if they are
to be kept by the customer after acceptance as per the contract terms. Each party should
hold a copy of the
Unpacking Inspection Report
and the Project Supervisor should
feedback the Acceptance Conclusion of the Report to be archived by the equipment
supplier.