24
Terminals in local control box
Terminals on source board
Terminal.board.of.actuator.with.electronics.
DMS2
If.the.actuator.is.of.the.single-phase.version.the.power.
supply.is.connected.to.terminals.
PE, N, U only..Terminals.
V, W.remain.unconnected.
Note:
The setting program enables data to be copied from the memory of parameters of the electronics DMS2
and DMS2 ED into the computer as a file with suffix
“par”
(in the example in the figure the file 52 030.par is created in
the directory Flash). The file can serve as a back-up for the case that it will be necessary to replace the position sensor
in the given actuator and to set it in the same way as the replaced one; or it can be sent as an enclosure to e-mail to
the manufacturing or service firm in solving possible problems..
Local control with two-line display
