Zorlu EVC05 Series, Руководство пользователя

Страница: 39 / 51

English - 38 © 2021 ZES - All rights reserved IB v3.0.0 2021
You can set OCPP configuration parameters to their default values by clicking “Set to Defaults”
button.
You can select the Ocpp settings type you want from the menu which is at the left side of the page. For
example Ocpp Connection,Ocpp Version,Connection Settings and OCPP Configuration Parameters.
Then, click “Save” button.
Please be careful for your entered values because the system does not accept the unsuitable
values and gives the warning. In this case, values will not be saved. Then the page does not to be
redirected the main page so you should check your values.
4.6 - NETWORK INTERFACE SETTING CHANGE IN WEB CONFIGURATION INTERFACE
There are three types of network interfaces in this page; Cellular, Ethernet and Wi-Fi.
Select interfaces’ modes as “Enabled” if you want to activate it.
If you set Cellular as enabled, “APN Name” is mandatory.
Cellular settings can be configured such as APN and pin number from the page below.