Zorlu EVC05 Series, Руководство пользователя

Страница: 49 / 51

English - 48 © 2021 ZES - All rights reserved IB v3.0.0 2021
12. Measure the earth resistance in the charger cables/outlets using a multimeter.
13. Clean the charging station interior if necessary.
14. Switch on the power to the charging station.
15. Complete and stick a service label inside the station with the date.
Other Recommended Controls
NO CONTROL DETAILS YES NO
Suitable
Answer
General Controls
1 Is the installation area of charging station suitable according to
the diamensions of the device and ergonomic for user? In ins-
tallation area, is it possible enough to reach service covers and
cable connections? Enough space for these purposes?
YES
2 Is there a heat source around the charging station area? NO
3 Is there a pressure water equipment around the charging station
area and possibility to be exposed to pressure water towards to
the station?
NO
4 Are the installation area and surface type available for installa-
tion?
YES
5 Around the installation area, are there any lines of electricity,
water, natural gas which may block hole punch and other instal-
lations?
NO
6 Is the installation area suitable when compared between the
charging station socket en and electrical vehicle charging entran-
ce point? Is the distance exceeds the charging cable? Controls
should be done according to the cables even on the charging
station if the station is cabled version, or cable of the user if the
charging station is socket type.
NO
7 Is the distance between the charging station and main distributi-
on box suitable according the the determined intervals?
For distances of 50 meters and below, recommended cross sec-
tion for AC mains can be applicable. For the distances more than
50 meters, the cable section calculation should be made by the
electrical installer.
YES
8 From the main distribution box to the charging station, are the
feed line’s own MCB and RCCB available? Are these MCB and
RCCB specifications match with the charging station accordig to
the stated values.
YES
9 Is incoming grounding line, which enters to the charging station,
has resistance value below 5 ohms?
YES