Zorlu EVC05 Series, Руководство пользователя

Страница: 23 / 51

English - 22 © 2021 ZES - All rights reserved IB v3.0.0 2021
3.6 - AC MAINS CABLE INSTALLATION
Connect the AC Mains cables, from left to right as; First connect “Line PE” cable, then “Line N”
cable, finally three phase cables (“Line 1”, “Line 2”, “Line 3”) as shown below.
PE N L1 L2 L3
Tighten the cable gland using an adjustable wrench. Close the unused cable entries with cable
gland plugs.
After installation it is needed to make controls as;
• Ensure that the PE is connected to the charger.
• Before proceeding, make sure voltage is present in the terminal blocks.
• Plugs should be in good conditions before starting the unit.
• Check no abnormal noise appears while the power is ON and also unit is charging.
• When closing the unit, keep in mind all cables should remain inside.
• Front cover opens and closes smoothly.
3.7 - DATA CABLE CONNECTION AND CONNECT OCPP OVER ETHERNET
Insert ethernet cable by passing the cable from the data cable gland in the bottom side of the sta-
tion as in the figures. Cut the supply cable leads in suitable lengths. In order to connect charging
station to the internet over the cable and make the necessary adjustments, first it is needed to
prepare the ethernet cable and plug this cable into the locales that should be on the device.