Zooka Sports ZS 720, Руководство пользователя

Страница: 25 / 32

PAGE 25
DIAGRAM 22 REPLACING THE CUP DIAGRAM 23 CLEANING THE OPTICAL SENSORS
5. Wipe off the cup and remove
any embedded grit or gummy
buildup. If necessary, scrape
carefully with a putty knife or other
dull blade. Wash the cup
in a mild solution of dishwashing
liquid and water.
6. Replace the cup and push it back
into the barrel. See Diagram 22.
The optical sensors that detect the
ball and measure its speed are located
in the orange plastic recesses on
opposite sides of the barrel just inside
the ball scoop. Clean the sensors
with a moist cotton swab.
Cleaning the optical sensors is
recommended after every few
practice sessions, or more often
under unusually dirty conditions.
Replacing the Battery
According to current environmental
regulations, the pitching machine’s
battery contains hazardous materials.
If you need to replace it, the battery
must be disposed of according to
Hazardous Waste Regulations.
DANGER: Do not drop or open
the battery case! The chemical
components inside the battery
can damage human tissue and
the surrounding environment.
The machine’s battery is built to last
a long time. However, if you find that
any of the following consistently occur,
you may want to replace the battery.
• errors 11, 22, or 31 continually
appear on the display after
minimal use.
• the machine won’t turn ON after
fully charging the battery.
• the battery display consistently
shows a low charge (less than 25%)
after minimal use.