PAGE 11
O N
O F F
U P
D O W N
E N T E R
AC C E S S
C O D E
O N
O F F
U P
D O W N
E N T E R
1
Pitching
Turning the Machine On
Once the pitching machine is set up,
make sure that the battery selector
switch on the rear panel is set to
INTERNAL. Press and hold the ON
button until you hear a beep. Then,
release the button.
The machine turns ON and ACCESS
CODE 1 appears in the display.
Entering Your Access Code
A 4-digit number must be entered
to activate the pitching mechanism.
Entry of this code must begin within
a few seconds of turning the machine
ON or it will shut down. The ACCESS
CODE helps prevent unauthorized use
of the pitching machine.
IMPORTANT: Once you enter the
access code, the machine will throw
a pitch whenever a ball is loaded. To
assure safety, do not reveal your Access
Code to anyone except responsible
adults. Always turn the machine OFF
before leaving it unattended.
Your pitching machine is shipped with
the ACCESS CODE preset to 1919.
It is strongly recommended that you
change the code to a 4-digit number
that you can easily remember. Refer
to “Changing the Access Code”
on page 17.
After turning the machine ON, the
display prompts you for the first two
digits of the ACCESS CODE.
1. Press the
▲
key to change the
first digit. See Diagram 12.
2. Use the
▼
key to adjust the
second digit.
3. When the two digits of the code
are shown correctly, press ENTER.
The display prompts you for the last
2 digits of your code. Repeat steps
1 - 3 above for the last two digits.
If you entered a correct ACCESS
CODE, the display advances to PITCH
mode. Otherwise, the unit displays
“Error 14” and turns OFF.
DIAGRAM 11
TURNING THE MACHINE ON
NOTE:
To turn the machine OFF, press
the ON/OFF button. The machine
beeps twice and turns OFF.
DIAGRAM 12
ENTERING THE ACCESS CODE
AC C E S S
C O D E
O N
O F F
U P
D O W N
E N T E R
1
5
Содержание ZS 720
Страница 1: ......