PAGE 18
Avoiding Problems
A few easy steps can be taken before
you need to call Customer Service
regarding ERROR codes or pitching
problems. Write ERROR codes down
and follow the instructions given here.
One of the first things to do is verify
whether a problem exists with the
charger or the battery.
Charger
The charger is operating properly if the
machine turns ON when the charger is
connected to the machine and plugged
into a power source. If the machine
remains OFF, then you need to:
check that the rear panel battery
selector switch is depressed toward
the INTERNAL battery position.
use a volt meter to check whether
the charger is defective. Note that
most electronic supply stores will do
this for you.
9
Battery
If the battery is suspect, then you
need to:
check that the rear panel battery
selector switch is depressed toward
the INTERNAL battery position.
press the ON button, hold it for a
few seconds and then release it
after you hear a beep. If the
machine does not turn ON, it is
most likely a dead or deeply dis-
charged battery. Charge the battery
for a full 24 hours. Refer to “Charg-
ing the Battery.” If the machine still
does not turn ON, the battery may
need replacement.
check that the internal battery
cables have not become discon-
nected. This requires opening the
machine. Refer to the instructions
found in “Replacing the Battery.”
Содержание ZS 720
Страница 1: ......