manualshive.com logo in svg

Zooka Sports ZS 720, Руководство пользователя, Страница: 21 / 32

Поделиться
Скачать
Zooka Sports ZS 720 Скачать руководство пользователя страница 21

PAGE 21

Troubleshooting

 - continued

Power-related Symptom

Solution

Machine turns itself OFF.

You may not have used it for over 10 minutes. If the optical sensors or display
keypad receive no input for 10 minutes, an automatic shutdown occurs.
The optical sensors may be blocked. Clear the optical path. Keep fingers
out of the barrel when loading balls. Clean optics.

An error may have occurred. Check the display for an ERROR code and
write it down. If you can, solve the problem and restart the machine.
Otherwise, call Customer Service.

Recharge or replace the battery. Refer to “Charging the Battery.”

ACCESS CODE-related Symptom

Solution

I forgot my ACCESS CODE.

Change the 4-digit ACCESS CODE. Refer to “Changing the Access Code”
on page 17.

Pitching-related Symptom

Solution

The compressor doesn’t start

Clean the optical sensors with a moist cotton swab. Refer to page 25.

Check the display. If an ERROR code appears, write it down and refer to
page 19. If necessary, turn the machine OFF and start over.

Содержание ZS 720

































Отзывы:

Нет отзывов