PAGE 28
DIAGRAM 30
APPLYING PRESSURE TO THE CASE
12. Replace the top of the case and
align the mounting holes. If it is
properly aligned, you will hear a
click as you apply gentle pressure
to the top of the case.
13. Replace the 10 screws and tighten
them gently.
IMPORTANT: Do not apply so
much pressure or tighten the
screws so severely that you cause
hairline fractures in the case.
14. Perform an operational check by
pressing the rear panel battery
select switch to INTERNAL, and
then take the following steps.
a. Set the machine upright and
turn it ON.
b. The display should prompt
you for your ACCESS CODE.
If the display is blank, recheck
the battery connections by
performing steps 1 through 9
and steps 11 through 14 until
you receive the prompt.
c. Turn the machine OFF.
15. Replace the aluminum spacer and
orange knob on the threaded bolt.
Refer to Diagram 25.
16. Attach the charger and plug it
into a power source. Charge the
new battery to full capacity before
using the machine. Refer to
“Charging the Battery.”
Disposing of the Battery
The high-capacity battery is a
sealed lead acid battery. Though
this type of battery is non-spillable
and can be shipped, it is also
considered hazardous waste and
must be disposed of according to
the Hazardous Waste Laws that
govern the area where you live.
Please be considerate of the environ-
ment and educate yourself on the
Hazardous Waste Laws in your area.
Dispose of the battery properly.
Battery Charger Power Cord
When the battery charger is in use,
ensure that the power supply cord
is placed away from moving parts
so that it cannot be damaged. If the
power supply cord or battery charger
module is damaged, it can only be
replaced by Zooka Sports.
Содержание ZS 720
Страница 1: ......
