PAGE 24
P O
R
T A
B
L E
B
U
L L
P E
N
ON
/ O
FF
U
P
D
OW
N
E
NT
ER
DIAGRAM 21
REMOVING THE CUP
DIAGRAM 20
TIPPING THE BARREL DOWN
Maintenance
To keep the pitching machine running
smoothly, you need to clean the unit
and charge the battery after each use.
This section describes these and other
maintenance tasks, such as obtaining
service and replacing the battery.
Cleaning the Machine
CAUTION: Unplug the charger and
turn OFF the machine before per-
forming any cleaning tasks.
To pitch successfully, the cup and
barrel must be cleaned after each use.
Grit and dirt easily transfer from the
balls into the barrel and shorten the
life of the cup and barrel.
To clean the barrel and cup, take the
following steps:
1. Remove the cup from the barrel.
Reach into the barrel and grasp the
cup in your fingertips.
2. Rotate the cup as you pull it out.
Pull slowly and steadily.
3. When the cup reaches the ball
scoop, you will need to pull the
rubber away from the sides of
the cup to facilitate removal.
4. Dump any dirt from the barrel
and wipe the inside of the cup
with a clean, dry cloth. The barrel
should be smooth and clean.
Deposits or marks on the barrel
can be wiped with a clean cloth
dampened with isopropyl rubbing
alcohol or a mild solution of
dishwashing liquid and water.
NOTE:
If the cup is out of reach,
position the machine so that the
barrel faces down. Gravity helps the
cup settle forward.
10
Содержание ZS 720
Страница 1: ......