Zontes ZT310M 2022, Руководство по обслуживанию

Страница: 85 / 88

⑥
Combine the right crankcase to two positioning pins, and complete the
box downward.
(Note: When placing the right crankcase, do not scratch the right
crankcase bearing pad and do not operate with violence when
closing the case to avoid bumping or scratching the parts and the
bonding surfaces.)
⑦
First load 5 M6 × 75 hex flange bolts from the right side, uniformly pretextile from the positioning pin position,
torsion, torsion of 12 ± 1.5 nm, rotate the casing, 8 M6 × 75 hex flange bolts are loaded into the crankcase from the
left side, and the diagonal is evenly tightened, and the torsion is 12 ± 1.5 nm.
8 After installing the starter motor as shown, putting 2 M6 × 30 hex flange bolts, and the tightening of the pretension,
the torque is 12 ± 1.5 N.m.
Tuning wrench