Zontes ZT310M 2022, Руководство по обслуживанию

Страница: 20 / 88

Cylinder head decomposition
1. As shown in the figure below, use 6#-inner hexagon to remove the high-pressure oil pipe bracket, intake manifold
sub-assembly and heat insulation pad (The heat insulation pad O-ring cannot be damaged or broken).
2. As shown in the figure below, use a 22# open-end wrench to remove the oxygen sensor, and T rod-8# to remove
the cylinder head clamp bracket. Use the spark plug sleeve to remove the spark plug. Use a 17# torx wrench to
remove the water and oil temperature sensor.
3. As shown in the figure below, loosen the cylinder head pressure plate and camshaft pressure plate bolts, and
remove the cylinder head pressure plate and camshaft pressure plate.
4. As shown in the figure below, use a 5# inner hexagon to remove the rocker arm limit block bolts, and remove the
rocker arm limit block, rocker shaft, intake and exhaust rocker arm, and valve adjustment gaskets.