Zontes ZT310M 2022, Руководство по обслуживанию

Страница: 60 / 88

3. Use clamp pliers to take out the clamp on the water pipe joint and the outlet pipe of the water pump cover, and then
pull out the coolant pipe.
4. Use a torque wrench (or wind screw) and an extended outer hexagonal sleeve-8# to remove the 11 M6×45
hexagon flange bolts on the right crankcase cover diagonally and counterclockwise, and remove the right crankcase
cover, 2
φ10 ×14 hollow positioning pin and right crankcase cover gasket.
5. After the right crankcase cover is removed from the engine, the magneto stator sub-component is on the right
crankcase cover. Use a torque wrench (or a wind screw) and an inner hexagon gun head -5# to put the three
GB70.1M6×25 bolts on the coil, two M5×15-5# inner hexagonal cylindrical screws on the trigger pressure plate, and
the stator Remove one M5×15-5# hexagon socket screw on the crimping plate.
Clamp pliers
Coolant pipe
M6×45 hexagon
flange face 9.8 grade
bolts (environmental
protection color zinc)