Zontes ZT310M 2022, Руководство по обслуживанию

Страница: 64 / 88

Four - Magneto rotor
Disassemble
1. After the right crankcase cover is removed, Special clamps for fixing the flywheel so that it does not turn freely, use
a torque wrench (or electric gun) and sleeve-14# to remove the M10×1.25×45 hexagonal flange bolts, and remove the
φ10 .3× φ28 ×4 washer; screw the flywheel puller into the thread on the flywheel, and remove the flywheel with a stun
gun and sleeve-17#.
2. Knock out the half-round key in the crankshaft groove with a copper rod, and take out the 25.2×37×1.6 thrust
washer; electric starter gear; electric starter reduction gear assembly; electric starter reduction gear shaft.
Remarks:
①
When hitting the semicircle key, the cloth should prevent the semicircle key or burr from falling into the
box.
②
Do not knock the half-round key to deform.
Special
M10×1.25×45
Hexagon
flange bolts
(10.9
grade/oxidized
φ10.3 × φ28 ×4
washer
Flywheel puller
Sleeve -17#
Half round key
Electric starter gear
Electric starter reduction gear shaft
Electric starter reduction gear assembly wheel
Thrust washer