Zontes ZT310M 2022, Руководство по обслуживанию

Страница: 59 / 88

10. Copper rod
11. Plane sealant
12. Thread fastening glue
13. Stun gun
Three. Right crankcase cover/magneto stator Disassemble
Disassemble
Before removing the right crankcase cover:
•Remove the complete toilet, and disconnect the trigger wire and magneto stator cable connector. (Refer to
ZT310T-M Maintenance Manual-Disassembly and Start-Remove Storage Box)
• Unscrew the water bolt to drain the coolant.
(Refer to ZT310T-M maintenance manual-2. Maintenance-
radiator for cooling liquid)
Note: If only the gasket of the right crankcase cover is replaced, there is no need to put the coolant, and the
water pipe does not need to be pulled out.
• Unscrew the oil bolt to drain the engine oil. (Refer to ZT310T-M Maintenance Manual-2. Maintenance-Engine
Oil for Draining Engine Oil)
•silencer. (Refer to ZT310T-M Maintenance Manual-2. Maintenance-Bolts and Nuts of Muffler for Muffler
Disassembly and Assembly)
1. As shown in the figure below, remove the decorative cover of the right engine cover (pull it outwards to remove it).
2. Remove the 3 locking bolts of the bottom lining of the right cover decorative cover with a 5# inner hexagon, and
remove the bottom lining of the right cover decorative cover.