ZSI-330 User Manual
Issue 01
Page 24 of 30
Video Loss Setup
For each video input, configure the way video loss detection is handled
For each video input, the following is configurable:
Internal Sync
If enabled, a blank screen is displayed, with the message ‘Video Loss Detected’ in the middle, when a camera is
selected which does not have a stable video input signal.
With this option disabled, the video input is displayed, but it is not possible to display text without a video signal.
Default =
Enabled
Alarm Enabled
This option enables the Alarm actions on the
Video Loss Events
screen.
Video loss can only be detected on the input currently displayed.
If this option is enabled, the camera will be automatically included in the
video detection sequence
. See the
Alarms
section for further details.
Default =
Enabled
MEYERTECH LIMITED
Z
S
I
-
3
3
0
