ZSI-330 User Manual
Issue 01
Page 15 of 30
Telephone number #1
Enter the ISDN phone number of the remote site. Numbers can be unto 20 digits.
Default =
[blank]
Telephone number #2
Enter the ISDN phone number for the second channel. This is often the same as the first number, or leave blank to
make a single (low bandwidth) call.
Default =
[blank]
Display
Configure the layout for all text displayed on the video. These settings affect both the local and remote display.
There are three configurable display areas
•
Camera captions : configurable text for each video input
•
Alarms : configurable message displayed when a contact alarm input is triggered
•
Commands: messages displayed when a command is received. E.g. ‘Relay 1 On’
For each, the following can be configured
Z
S
I
-
3
3
0
Enabled
This setting overrides any individual setup by camera or alarm, and switches off the selected display area
Default =
On
MEYERTECH LIMITED
