ZSI-330 User Manual
Issue 01
Page 11 of 30
Connection
Select the communication method from
2-wire
half duplex or
4-wire
full duplex RS485
Default =
2-wire
Protocol
Where a 3
rd
party EFD has been purchased, the protocol used to control the receivers can be selected to match
the type of receivers
Default =
ZoneVu
Controller
Site
Set the site number for this controller. This is used when controlling the ZSI-330 from a remote site.
Default =
1
Site controller present
Tick this box if a site controller is attached to the ZoneVu port.
DO NOT USE - This function is not yet supported.
Default =
No
Z
S
I
-
3
3
0
Control timeout
Enter a timeout, in seconds, after which camera control will automatically be removed from a keyboard. The timer is
reset whenever telemetry is transmitted.
Default =
60 seconds
Enabled =
Yes
MEYERTECH LIMITED
