ZSI-330 User Manual
Issue 01
Page 21 of 30
Switch
If enabled, the monitor will be switched, to view the selected camera. If multiple active alarms have the switch enabled,
the most recent alarm will be displayed.
Default =
No
Record
If enabled, the video will be recorded immediately the alarm is triggered. This feature is intended to capture the vital
seconds after an alarm, whilst a connection is made to the remote control room.
The most recent alarm event only can be replayed by the remote operator.
Default =
No
Report
Local operator
The MAC address of the keyboard to report the alarm to. Other options =
All, None, PC
Default =
All
Remote site
The site number of the control room to report the alarm to. If enabled, the remote site is automatically dialled,
to report the alarm. A phone number is required for the site number in the
Telephone
section.
Default =
None
Enabled =
No
Relay
Action
Select a state for one of the auxiliary relay outputs. Options:
None, Open, Close, Pulse.
Pulse
closes the relay for 1 second.
Default =
None
Relay number
The auxiliary relay number, from 1 to 4.
Default =
None
MEYERTECH LIMITED
Z
S
I
-
3
3
0
