ZSI-330 User Manual
Issue 01
Page 18 of 30
Alarms
General settings for handling the various alarm inputs, and alarm conditions.
Connection indicator
An auxiliary relay output can be used to indicate when the ZSI-330 is using the ISDN line
Relay number
The auxiliary relay output number. Range
1 – 4.
Default =
[none]
Enabled =
False
Connection failure report
When a call is ended unexpectedly, for example due to a line fault, an alarm can be reported.
Operator
The MAC address the condition should be reported to.
The alarm will be reported from
Peripheral 102
, with the alarm number indicating the
site number
which was
connected.
Default =
No report
Z
S
I
-
3
3
0
Video Detection Sequence
If alarm events are enabled for video loss (see
Video loss setup
), then it is necessary to run a camera sequence, during
which each video input is checked for video loss, for which video loss events are enabled.
MEYERTECH LIMITED
