Zonet ZPW4000, Руководство пользователя

Страница: 73 / 94

802.11n Wireless Print Server User Manual
69
System V Release 4 Unix
1. For example: the print server has a static IP address: 192.168.1.100
2.
Input “ lpsystem –tbsd 192.168.1.100 ”.
3. Input “ lpadmin –pa1 –s 192.168.1.100!lp1 ”. lp1 for the first print server
port.
4.
Input “ accept a1 ”.
5.
Input “ enable a1 ”.
Red Hat Linux 9 and Fedora
The Print Server can work under any Linux-based systems, including Slackware,
RedHat, etc, without any problems.
Basically, the Linux's printing system is based on BSD system. Although many
commercial Linux systems are available in the market and their commands will
vary slightly, depending upon which version is used, the functionality of the
Linux-based variants is exactly the same.
Following are the outlined procedures (
recommended for all users ) on Red Hat
Linux 7.2/7.3 or later with X-Window system installed.
1.
Make sure that the TCP/IP is well configured on your RedHat system,
including network interface card's driver and IP-related settings say, IP
address, subnet mask, and gateway IP).
2.
Log in root .
3.
Assign Print Server an IP address. At shell mode:
c.1. arp -s <the IP address you want to assign to the Print Server> < Print
Server 's Node ID>
c.2. Execute tftp < Print Server 's IP> get config.txt and quit tftp.
c.3. Edit the config.txt and modify the IP address, subnet mask, and
gateway IP. When done, save the config.txt.
c.4. Execute tftp <Print Server 's IP> put config.txt and quit tftp.
4.
Start X-windows by typing startx at the shell mode.