Zodiac NZO-760, Руководство пользователя, Страница: 90 / 302

Page 29/ 58
E
N
G
L
I
S
H
INSTALLATION AND CIRCUITS
–
Fuel
Changing the filter cartridge:
Follow Z Marine
’s recommendations and those of the filter’s manufacturer.
Place a draining funnel under the position of the cartridge to be replaced.
Before replacing the filter, the pressure in the fuel feed system must be released.
Follow th
e manual or the engine manufacturer’s instructions.
Fuel is extremely inflammable. TURN OFF THE ENGINE, disconnect the battery and do not
smoke or install the kit near a naked flame. Put a drainage funnel under the place where the
cartridge will be replaced
Before replacing the filter, the pressure in the fuel feed system must be released.
RECOMMENDATIONS
DANGER
IN THE EVENT OF A PETROL LEAK OR A FIRE, THE PETROL
CIRCUIT SHUT-OFF VALVE LOCATED ON THE TANK ENABLES
THE TANK TO BE CUT OFF FROM THE PETROL CIRCUIT AND
MUST REMAIN CLOSED.
WARNING

HAVING A FULL TANK AVOIDS CONDENSATION APPEARING
ON EACH OUTLET.

GET THE TANK CLEANED EVERY FIVE YEARS.

CHECK THE TIGHTENING OF THE CLAMPS ON ALL HOSES.

WHEN YOU DRAIN THE FILTER, DO NOT EMPTY THE WATER
INTO THE BOAT. USE A RECOVERY TRAY UNDER THE FILTER.

SHUT-OFF THE POWER SUPPLY BEFORE DISMANTLING THE
FILTER CARTRIDGE.

CAREFULLY READ THE INFORMATION
ON THE FILTER’S
INSTRUCTIONS.
DANGER

PETROL IS EXTREMELY FLAMMABLE. MAKE SURE THAT
ENGINES ARE TURNED OFF BEFORE WORKING ON THE FUEL
SYSTEM.
DO NOT SMOKE; KEEP ALL NAKED FLAMES OR INCANDESCENT
BODIES WELL AWAY FROM THE WORK AREA.
WARNING

NEVER DRILL THE TANK AREA WITH A DRILL BIT
PROTRUDING MORE THAN 30 MM FROM THE DRILL HEAD
(MARKED ON THE DECK BY A HATCH) AND DO NOT USE
SCREWS OVER 30 MM LONG.