p. 26/61
The end-user should not perform any interventions, repairs, etc. of the unit.
In case that warning and failures arise, check the failures table (applied at the
end of this manual) and call the service support if the case is not described
there;
Any adjustments of thermal capacity higher than the nominal thermal load of
the unit is not allowed;
The ash residue should be collected in fireproof containers and cooled down
to ambient temperature. The cooled ash should be disposed in appropriate
waste containers. Please take into account that the mineral ash, result of
wood biomass pellets could be considered/utilized as soil fertilizer and
dispersed for agricultural purposes for example;
5.2.1.
Interface control board of automatic pellet burner of series “GP cs”
Figure 5.1.
Interface board, equipped with indicator lamps and control elements
of automatic pellet burner of series “GP cs”.
Interface board devices description:
“POWER” indicator
–
shows presence of power supply to the
main unit
;
“START” indicator
–
shows presence of
operation
signal,
supplied by external control module
;
Thermal capacity adjustment potentiometer
–
sets the operating
thermal capacity (i.e. the fuel flow rate) of the burner
;
“START” indicator
“POWER”
indicator
Potentiometer for
thermal capacity
adjustment
